top of page
LAMINAAT
Form
Form®
G-Form® is a compact laminate bending technology that allows the compact sheet to be formed. It allows to create curves and shapes and provides aesthetic advantages. It is preferred in many areas, especially the applications of sills, windows-door frames, benches and columns.
EN CLASSIFICATION: CGS , CGF
EN 438 - 4
Thickness: 4 mm - 6 mm - 8 mm - 10 mm
Dimensions: S / L
G-Form® is a compact laminate bending technology that allows the compact sheet to be formed. It allows to create curves and shapes and provides aesthetic advantages. It is preferred in many areas, especially the applications of sills, windows-door frames, benches and columns.
EN CLASSIFICATION: CGS , CGF
EN 438 - 4
Thickness: 4 mm - 6 mm - 8 mm - 10 mm
Dimensions: S / L
Crea
Crea®
It is used for decoration in many areas, especially in the door sector.
G-Crea® that gives a different look using a special technique specific to Nordicext's rich color and pattern variety offers freedom of design by combining different decor papers.
EN Classification: VGS , HGS , CGS
EN 438 - 3 / 4
Thickness: 0,60 mm - 20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm - 1400x3660 mm
1540x3660 mm - 1860x4200 mm
Please contact us for customized dimensions and colors.
It is used for decoration in many areas, especially in the door sector.
G-Crea® that gives a different look using a special technique specific to Nordicext's rich color and pattern variety offers freedom of design by combining different decor papers.
EN Classification: VGS , HGS , CGS
EN 438 - 3 / 4
Thickness: 0,60 mm - 20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm - 1400x3660 mm
1540x3660 mm - 1860x4200 mm
Please contact us for customized dimensions and colors.
Flex
Flex®
G-Flex® is a flexible laminate used in different application systems such as doors, door frames and floor profiles.
Thanks to its powerful surface properties, it reduces labor costs and time spent and allows to manufacturers saving of paint, coating and flooring costs.
It is recommended to use it on vertical surfaces, especially areas requiring sharp turns. It is used for doors, frames and general profiles.
Synchroflex®
Due to its surface depth and its ultra-flexible structure, it allows very different applications than smooth surface applications.
Microflex®
Products with high surface toughness, elasticity and resistance. One of the greatest advantages of Microflex is that the product can be supplied in any color in the rich Nordicext range.
Aluflex®
Products offer high quality and durability that show the harmony between aluminum colors and ultra-elasticity.
EN Classification: HGP, HGS, VGP, VGS
EN 438 - 3
Thickness: 0,15 mm - 0,40 mm
Dimensions: 950 mm - 1224 mm - 1300 mm - 1400 mm
Warning: G-Flex® can be manufactured for minimum lengths of 250 m and above based on the thickness.
G-Flex® is a flexible laminate used in different application systems such as doors, door frames and floor profiles.
Thanks to its powerful surface properties, it reduces labor costs and time spent and allows to manufacturers saving of paint, coating and flooring costs.
It is recommended to use it on vertical surfaces, especially areas requiring sharp turns. It is used for doors, frames and general profiles.
Synchroflex®
Due to its surface depth and its ultra-flexible structure, it allows very different applications than smooth surface applications.
Microflex®
Products with high surface toughness, elasticity and resistance. One of the greatest advantages of Microflex is that the product can be supplied in any color in the rich Nordicext range.
Aluflex®
Products offer high quality and durability that show the harmony between aluminum colors and ultra-elasticity.
EN Classification: HGP, HGS, VGP, VGS
EN 438 - 3
Thickness: 0,15 mm - 0,40 mm
Dimensions: 950 mm - 1224 mm - 1300 mm - 1400 mm
Warning: G-Flex® can be manufactured for minimum lengths of 250 m and above based on the thickness.
Floor
Floor®
It is used as raised flooring and flooring material which enables cable passages, especially computer rooms.
The G-Floor® is resistant to scratches and abrasions thanks to its extra reinforced surface.
It can be manufactured as AC2, AC3, AC4 and AC5.
EN Classification: HGS, CGS
EN 438 - 3 / 4 / 5
Thickness: 0,80 mm – 20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm
Please contact us for customized dimensions and colors
It is used as raised flooring and flooring material which enables cable passages, especially computer rooms.
The G-Floor® is resistant to scratches and abrasions thanks to its extra reinforced surface.
It can be manufactured as AC2, AC3, AC4 and AC5.
EN Classification: HGS, CGS
EN 438 - 3 / 4 / 5
Thickness: 0,80 mm – 20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm
Please contact us for customized dimensions and colors
ext
Fire
Fire®
G-Fire® is a product that demonstrates superior resistance to fire and spread of fire. Thanks to special materials used in production, it is extra resistant against fire. It does not form smoke and does not contain toxic gas. G-Fire® is especially preferred in vehicles used for passenger transportation such as ships, trains, buses, and in hotels, schools, hospitals, business centers, elevators, public institutions and organizations.
EN Classification: HGF, VGF, CGF
EN 438 - 3 /4
KThickness: 1,50 mm - 20 mm
Dimensions:
HPL :1220 x 2440 mm - 1300 x 2800 mm - 1300 x 3050 mm - 1400 x 3660 mm - 1540 x 3050 mm
1540 x 3660 mm - 1860 x 4200 mm
G-Fire® is a product that demonstrates superior resistance to fire and spread of fire. Thanks to special materials used in production, it is extra resistant against fire. It does not form smoke and does not contain toxic gas. G-Fire® is especially preferred in vehicles used for passenger transportation such as ships, trains, buses, and in hotels, schools, hospitals, business centers, elevators, public institutions and organizations.
EN Classification: HGF, VGF, CGF
EN 438 - 3 /4
KThickness: 1,50 mm - 20 mm
Dimensions:
HPL :1220 x 2440 mm - 1300 x 2800 mm - 1300 x 3050 mm - 1400 x 3660 mm - 1540 x 3050 mm
1540 x 3660 mm - 1860 x 4200 mm
Digi
Digi
G-Digi®, created using computer-generated patterns on the surfaces, is a product that transforms your designs into decorations.
EN Classification: CGS , HGS , HGP , VGS , VGP
EN 438 - 3 / 4
Thickness: 0,70 mm - 20 mm
Dimensions: 1300 x 3050 mm - 1400 x 3660 mm
Please contact us for customized dimensions and colors.
G-Digi®, created using computer-generated patterns on the surfaces, is a product that transforms your designs into decorations.
EN Classification: CGS , HGS , HGP , VGS , VGP
EN 438 - 3 / 4
Thickness: 0,70 mm - 20 mm
Dimensions: 1300 x 3050 mm - 1400 x 3660 mm
Please contact us for customized dimensions and colors.
Bio
Bio
G-Bio® is a product with an integrated hygienic structure that can be produced as a laminate or compact laminate used against bacteria. G-Bio® continuously and effectively neutralizes the ability to grow and multiply of more than 99% of bacteria within 24 hours. Thanks to the homogeneous distribution of the surface properties of G-Bio®, it is effective on the entire surface and maintains its activity throughout the life of the product. The bacteria with which G-Bio® is predominantly resistant are Pseudomonas Aeruginosa, Staphylococcus Aerus, Salmonella Choleraaesius, and Escherichia coli.
All these features of G-Bio® are certified by ISEGA with test results. It does not infect food and air and does not generate emissions.
G-Bio® is used in industrial kitchens where food is processed, in hospitals, treatment and care rooms, pharmacies, laboratories, public transport vehicles, banks and in all areas where hygiene is important.
EN Classification: HGS, VGS, CGS
EN 438 - 3 / 4
Thickness: 0,80 mm - 20 mm
Dimensions: 1540x3660 mm
G-Bio® is a product with an integrated hygienic structure that can be produced as a laminate or compact laminate used against bacteria. G-Bio® continuously and effectively neutralizes the ability to grow and multiply of more than 99% of bacteria within 24 hours. Thanks to the homogeneous distribution of the surface properties of G-Bio®, it is effective on the entire surface and maintains its activity throughout the life of the product. The bacteria with which G-Bio® is predominantly resistant are Pseudomonas Aeruginosa, Staphylococcus Aerus, Salmonella Choleraaesius, and Escherichia coli.
All these features of G-Bio® are certified by ISEGA with test results. It does not infect food and air and does not generate emissions.
G-Bio® is used in industrial kitchens where food is processed, in hospitals, treatment and care rooms, pharmacies, laboratories, public transport vehicles, banks and in all areas where hygiene is important.
EN Classification: HGS, VGS, CGS
EN 438 - 3 / 4
Thickness: 0,80 mm - 20 mm
Dimensions: 1540x3660 mm
Alu
Alu
It is a laminate and compact laminate product produced by coating metals such as a thin layer of aluminum, copper or stainless steel on the surface instead of decorative paper.
Thanks to its protective foil, G-Alu® is resistant to impacts which can occur on metal surfaces during transportation and manufacturing. The surface of the material is easily cleaned with a damp cloth and a light cleaning material that does not contain abrasives.
The product is preferred in interior decoration and furniture industry thanks to its modern design line, different texture and special surfaces. It is recommended to use it indoors and on vertical surfaces. It is recommended not to remove the foil during the application phase.
G-Alu® SR
The product is metal laminate with increased scratch resistance.
Special products and techniques have been used during production to increase scratch resistance.
It is suitable for surface usage and easy to clean.
EN Classification: CGS , HGS , HGP , VGS , VGP
EN: 438 - 3 / 4 / 8
Thickness: 0,50 mm – 20 mm
Dimensions:
HPL : 1300x3050 mm – 1300x2800 mm
CPL : 1220 mm - 1300 mm - 1400 mm
Please contact us for customized dimensions and colors.
It is a laminate and compact laminate product produced by coating metals such as a thin layer of aluminum, copper or stainless steel on the surface instead of decorative paper.
Thanks to its protective foil, G-Alu® is resistant to impacts which can occur on metal surfaces during transportation and manufacturing. The surface of the material is easily cleaned with a damp cloth and a light cleaning material that does not contain abrasives.
The product is preferred in interior decoration and furniture industry thanks to its modern design line, different texture and special surfaces. It is recommended to use it indoors and on vertical surfaces. It is recommended not to remove the foil during the application phase.
G-Alu® SR
The product is metal laminate with increased scratch resistance.
Special products and techniques have been used during production to increase scratch resistance.
It is suitable for surface usage and easy to clean.
EN Classification: CGS , HGS , HGP , VGS , VGP
EN: 438 - 3 / 4 / 8
Thickness: 0,50 mm – 20 mm
Dimensions:
HPL : 1300x3050 mm – 1300x2800 mm
CPL : 1220 mm - 1300 mm - 1400 mm
Please contact us for customized dimensions and colors.
Anti Grafiti
Anti Grafitti
G-Com Anti-Graffiti® is a high pressure laminate adapted for use as surface material in areas exposed to graffiti applications.
Laminate is produced from different layers of the impregnated paper (phenolic for the core and melamine for the surface) by pressing in the high pressure hydraulic press that exposes the impregnated paper layers to high temperature (up to 150°C) and high pressure values (up to 90 Kg/cm²). G-Com Anti-Graffiti® has mechanical properties such as tensile strength, bending-flexural strength, low thermal expansion coefficient and high electrical resistance. It has a high performance surface with high abrasion and scratch resistance.
G-Com Anti-Graffiti® can be used in graffiti applications, in areas exposed to materials such as different types of paints, felt pens and cleaners.
EN Classification: CGS, CGF
EN 438-4
Thickness: 2 mm - 20 mm
Dimensions: 1540x3660 mm
G-Com Anti-Graffiti® is a high pressure laminate adapted for use as surface material in areas exposed to graffiti applications.
Laminate is produced from different layers of the impregnated paper (phenolic for the core and melamine for the surface) by pressing in the high pressure hydraulic press that exposes the impregnated paper layers to high temperature (up to 150°C) and high pressure values (up to 90 Kg/cm²). G-Com Anti-Graffiti® has mechanical properties such as tensile strength, bending-flexural strength, low thermal expansion coefficient and high electrical resistance. It has a high performance surface with high abrasion and scratch resistance.
G-Com Anti-Graffiti® can be used in graffiti applications, in areas exposed to materials such as different types of paints, felt pens and cleaners.
EN Classification: CGS, CGF
EN 438-4
Thickness: 2 mm - 20 mm
Dimensions: 1540x3660 mm
Board
Board
G-Board® The product is a board laminate designed with two different production techniques. It has two different surface properties.
Matte finish G-Board®: Provides ease of writing and erasing thanks to the contrast created using dry (dusty) chalk. It can be manufactured in black, green and dark blue colors. It is used on price tables and signs in schools, universities, classrooms, bars, cafes, restaurants, and on mobile boards, in meeting and conference rooms.
Glossy finish G-Board® : It is a product with a surface that can be written with bright water-based ink pens and easy to clean and easy to erase. It is durable and long-lasting. It is manufacture only in white color. It is used mainly on price tables and signs in schools, universities, classrooms, bars, cafes, restaurants, and on mobile boards, in meeting and conference rooms and has a very wide area of use.
G-Magnet®
It is an alternative product under G-Board® product, which is used in educational institutions, offices, restaurants, marking-promotional panels and other areas where all magnetic materials need to be on the background, thanks to its internal magnetic properties.
EN Classification: VGS
EN 438-3
EThickness: 0.70 mm - 1.20 mm
Dimensions / G-Board: 1220x2440mm - 1300x2800mm - 1300x3050mm
Dimensions / G-Magnet: 1220x2440mm
G-Board® The product is a board laminate designed with two different production techniques. It has two different surface properties.
Matte finish G-Board®: Provides ease of writing and erasing thanks to the contrast created using dry (dusty) chalk. It can be manufactured in black, green and dark blue colors. It is used on price tables and signs in schools, universities, classrooms, bars, cafes, restaurants, and on mobile boards, in meeting and conference rooms.
Glossy finish G-Board® : It is a product with a surface that can be written with bright water-based ink pens and easy to clean and easy to erase. It is durable and long-lasting. It is manufacture only in white color. It is used mainly on price tables and signs in schools, universities, classrooms, bars, cafes, restaurants, and on mobile boards, in meeting and conference rooms and has a very wide area of use.
G-Magnet®
It is an alternative product under G-Board® product, which is used in educational institutions, offices, restaurants, marking-promotional panels and other areas where all magnetic materials need to be on the background, thanks to its internal magnetic properties.
EN Classification: VGS
EN 438-3
EThickness: 0.70 mm - 1.20 mm
Dimensions / G-Board: 1220x2440mm - 1300x2800mm - 1300x3050mm
Dimensions / G-Magnet: 1220x2440mm
ZERO / PST
Uv+
Exterior compact panels produced with HPL production technique. The surface layer of the G-UVP® compact panels has been specially treating and extra reinforcing. Panels resistant to sunlight do not contain bacteria and have dirt-repellent properties. It is used in exterior cladding areas where climate conditions are suitable. It has a lot of dimensional and color alternatives.
EN Classification: EDS , EDF
EN 438 - 4 / 6
Thickness: 4 mm – 20 mm
Dimensions: 1300 x 2800 mm - 1300 x 3050 mm
Please contact us for customized dimensions and colors.
Xray
Xray
G-Xray® is a compact laminate manufactured by adding lead sheets of 1 mm, 2 mm and 3 mm between the Kraft papers during manufacturing process.
Thanks to its feature gained, it is used for armoring the X-ray chambers, separation of sensitive devices and forming a screen. It is manufactured in accordance with the regulation of the Turkish Atomic Agency for armoring.
EN Classification: CGS
EN: 438 - 4
Thickness: 6 mm - 8 mm - 10 mm
Dimensions:
940x2140 mm
G-Xray® is a compact laminate manufactured by adding lead sheets of 1 mm, 2 mm and 3 mm between the Kraft papers during manufacturing process.
Thanks to its feature gained, it is used for armoring the X-ray chambers, separation of sensitive devices and forming a screen. It is manufactured in accordance with the regulation of the Turkish Atomic Agency for armoring.
EN Classification: CGS
EN: 438 - 4
Thickness: 6 mm - 8 mm - 10 mm
Dimensions:
940x2140 mm
Solo
Solo
G-Solo® is a massive plate that is manufactured in a single color from its surface up to its center.
In addition to having an aesthetic appearance, its application area is very wide with antibacterial properties and fire resistance. The ability to eliminate the different colorants that may form on the edges when processed is a key feature that distinguishes G-Solo® from other products. It has no post-forming characteristic.
With its functional structure, it can be used for various purposes from advertising sector to medical, cosmetic and decoration sectors.
EN Classification: VGS, CGS
EN:438 - 3 /4
Thickness: 0,80 mm-20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm - 1400x3660 mm
1540x3050 mm - 1540x3660 mm
1860x4200 mm
G-Solo® is a massive plate that is manufactured in a single color from its surface up to its center.
In addition to having an aesthetic appearance, its application area is very wide with antibacterial properties and fire resistance. The ability to eliminate the different colorants that may form on the edges when processed is a key feature that distinguishes G-Solo® from other products. It has no post-forming characteristic.
With its functional structure, it can be used for various purposes from advertising sector to medical, cosmetic and decoration sectors.
EN Classification: VGS, CGS
EN:438 - 3 /4
Thickness: 0,80 mm-20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm - 1400x3660 mm
1540x3050 mm - 1540x3660 mm
1860x4200 mm
Tech
G-Tech® is a laminate produced to prevent the accumulation or transmission of electricity and electrical powers in the environment where it is used. It provides all standards for electrical properties, even at low and high humidity levels. Ideal for many applications that are sensitive electronically. It is also suitable for existing workstations and production benches in the manufacture of electronic products, as well as for panels to which electrical circuits are connected.
EN Classification: HGS, VGS , CGS
EN: 438 - 3
DIN EN 61340-5-1/2
Thickness: 0,90 mm / 1,2 mm / 4 mm
Dimensions:
1300 x 3050 mm – 1540 x 3660 mm
Please contact us for customized dimensions and colors.
Skate
Skate
G-Skate® is a high-pressure laminate produced for use as the surface of skateboard ramps. Laminates are produced from different layers of the impregnated paper (phenolic for the core and melamine for the surface) by pressing in the high pressure hydraulic press that exposes the impregnated paper layers to high temperature (up to 150°C) and high pressure values (up to 90 Kg/cm²).
G-Skate® is manufactured to have a HPL core feature that demonstrates superior performance in terms of a special surface treatment technology for superior surface performance (high abrasion resistance, low slip effect and high impact resistance suitable for use in hard and soft skate rollers) and mechanical properties (tensile strength, flexural-bending strength, low thermal expansion coefficient and high electrical resistance).
EN Classification: CGS, CGF
EN 438 - 4
Thickness: 4 mm- 12 mm
Dimensions:
1220x2440 mm
G-Skate® is a high-pressure laminate produced for use as the surface of skateboard ramps. Laminates are produced from different layers of the impregnated paper (phenolic for the core and melamine for the surface) by pressing in the high pressure hydraulic press that exposes the impregnated paper layers to high temperature (up to 150°C) and high pressure values (up to 90 Kg/cm²).
G-Skate® is manufactured to have a HPL core feature that demonstrates superior performance in terms of a special surface treatment technology for superior surface performance (high abrasion resistance, low slip effect and high impact resistance suitable for use in hard and soft skate rollers) and mechanical properties (tensile strength, flexural-bending strength, low thermal expansion coefficient and high electrical resistance).
EN Classification: CGS, CGF
EN 438 - 4
Thickness: 4 mm- 12 mm
Dimensions:
1220x2440 mm
Sign
Sign
G-Sign® is a compact laminate manufactured by the process of uncovering the Kraft papers of different colors between layers.
They are easy-to-clean and durable. It is preferred for signboard and plate making.
EN Classification: VGS, CGS
EN 438 - 3 / 4
Thickness: 0,70 mm-20 mm
Dimensions:
1220x2440 mm
Please contact us for customized dimensions and colors.
G-Sign® is a compact laminate manufactured by the process of uncovering the Kraft papers of different colors between layers.
They are easy-to-clean and durable. It is preferred for signboard and plate making.
EN Classification: VGS, CGS
EN 438 - 3 / 4
Thickness: 0,70 mm-20 mm
Dimensions:
1220x2440 mm
Please contact us for customized dimensions and colors.
Line
LineUsed DecorQuality CertificatesTechnical Documents / CatalogsApplication Visuals
G-Line®
G-Line® is a decorative panel that can made decor and Kraft layers in different color. With all the outstanding features and durability of normal compact laminate, G-Line® is used in different designs and applications with its decorative structure.
EN Classification: CGS, CGF
EN 438-4
Thickness: 3mm - 20 mm
Dimensions:
1300x2800 mm - 1300x3050 mm
1400x3660 mm – 1400 x 3200 mm
Please contact us for customized dimensions and colors.
G-Line®
G-Line® is a decorative panel that can made decor and Kraft layers in different color. With all the outstanding features and durability of normal compact laminate, G-Line® is used in different designs and applications with its decorative structure.
EN Classification: CGS, CGF
EN 438-4
Thickness: 3mm - 20 mm
Dimensions:
1300x2800 mm - 1300x3050 mm
1400x3660 mm – 1400 x 3200 mm
Please contact us for customized dimensions and colors.
Pheno
Pheno
G-Pheno®, produced without the use of decorative paper, is manufactured in different thicknesses according to the intended use and is used as a technical support material in many fields, mainly electronic and machine industry.
EN Classification: VGS , VGP , HGS , VGP , CGS
EN 438 - 3 / 4
Thickness: 0,50 mm - 20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm - 1400x3660 mm
1540x3050 mm - 1540x3660 mm
1860x4200 mm
G-Pheno®, produced without the use of decorative paper, is manufactured in different thicknesses according to the intended use and is used as a technical support material in many fields, mainly electronic and machine industry.
EN Classification: VGS , VGP , HGS , VGP , CGS
EN 438 - 3 / 4
Thickness: 0,50 mm - 20 mm
Dimensions:
1220x2440 mm - 1300x2800 mm
1300x3050 mm - 1400x3660 mm
1540x3050 mm - 1540x3660 mm
1860x4200 mm
Morpho
Morpho
G-Morpho® is a laminate that is manufactured by placing metal sheets between the Kraft layers.
G-Morpho® is easy to process like compact laminate, white squares and surfaces that occur after processing give a very decorative appearance. Aluminum is a soft metal and protects its color.
G-Morpho®, which offers decorative rich options, is often used in table and bench applications.An environment with temperature between +15˚C and + 35˚C and 30%-70% relative humidity is recommended for the G-Morpho® panels.
EN Classification: CGS, CGF
EN 438-4
Thickness: 3 mm - 20 mm
Dimensions
1220x2440 mm
Please contact us for customized dimensions and colors.
G-Morpho® is a laminate that is manufactured by placing metal sheets between the Kraft layers.
G-Morpho® is easy to process like compact laminate, white squares and surfaces that occur after processing give a very decorative appearance. Aluminum is a soft metal and protects its color.
G-Morpho®, which offers decorative rich options, is often used in table and bench applications.An environment with temperature between +15˚C and + 35˚C and 30%-70% relative humidity is recommended for the G-Morpho® panels.
EN Classification: CGS, CGF
EN 438-4
Thickness: 3 mm - 20 mm
Dimensions
1220x2440 mm
Please contact us for customized dimensions and colors.
Lam
Lam
G-Lam® is manufactured with state-of-the-art laminate technology, with superior post-forming properties, increased abrasion resistance, hygienic surface, rich and high-quality color choices. It can be used comfortably in interior decorations, in home and office furniture, kitchen, bathroom and cabinet doors, on hotel doors, in schools, in public offices and decorative finishes, and in all decorative applications occurred by your imagination. It is manufactured in two forms as HPL and CPL.
G-Lam® HPL
Decorative laminates with standard or post-forming features, with thicknesses from 0.50 mm to 1.20 mm that can be produced with plate options in various sizes and on different surfaces. They are manufactured under temperature of 160˚C and under 100–120 kg/m² pressure for duration of 60-70 minutes after impregnation processes of papers in different characteristics. Thanks to the non-porous surface due to high pressure and heat, it does not allow bacteria formation.
G-Lam® CPL
This product, also known as roll laminate, is produced by pressing the impregnated paper with cylinders and moving it between two steel strips at 170°C under pressure. The non-porous surface does not allow bacteria formation. CPL can be manufactured as plates and rolls with thicknesses from 0.30 mm to 1.00 mm, in post-forming characteristic and in desired length. This allows users to produce in a rapid, continuous manner.
EN Classification: HGS, VGS, HGP, VGP
EN 438-3
Thickness: 0,20 mm - 1,20 mm
Dimensions:
HPL :1220 x 2440 mm – 1300 x 2800 mm – 1300 x 3050 mm
1400 x 3660 mm – 1540 x 3050 mm – 1540 x 3660 mm
*CPL : 950 mm – 1240 mm – 1300 mm – 1400 mm
*CPL can be produced in any desired length
G-Lam® is manufactured with state-of-the-art laminate technology, with superior post-forming properties, increased abrasion resistance, hygienic surface, rich and high-quality color choices. It can be used comfortably in interior decorations, in home and office furniture, kitchen, bathroom and cabinet doors, on hotel doors, in schools, in public offices and decorative finishes, and in all decorative applications occurred by your imagination. It is manufactured in two forms as HPL and CPL.
G-Lam® HPL
Decorative laminates with standard or post-forming features, with thicknesses from 0.50 mm to 1.20 mm that can be produced with plate options in various sizes and on different surfaces. They are manufactured under temperature of 160˚C and under 100–120 kg/m² pressure for duration of 60-70 minutes after impregnation processes of papers in different characteristics. Thanks to the non-porous surface due to high pressure and heat, it does not allow bacteria formation.
G-Lam® CPL
This product, also known as roll laminate, is produced by pressing the impregnated paper with cylinders and moving it between two steel strips at 170°C under pressure. The non-porous surface does not allow bacteria formation. CPL can be manufactured as plates and rolls with thicknesses from 0.30 mm to 1.00 mm, in post-forming characteristic and in desired length. This allows users to produce in a rapid, continuous manner.
EN Classification: HGS, VGS, HGP, VGP
EN 438-3
Thickness: 0,20 mm - 1,20 mm
Dimensions:
HPL :1220 x 2440 mm – 1300 x 2800 mm – 1300 x 3050 mm
1400 x 3660 mm – 1540 x 3050 mm – 1540 x 3660 mm
*CPL : 950 mm – 1240 mm – 1300 mm – 1400 mm
*CPL can be produced in any desired length
Lab
Lab
G-Lab® is a bench panel with extra durability against chemicals thanks to the special surface produced using advanced technology.
Thanks to a G-Lab® feature, it is manufactured to last 24 hours with the most aggressive chemicals with its surface that is not affected by cleaning materials, strong organic solvents, acids, bases and salts. Thanks to all these features, it is easy-to-maintain and easy-to-clean.
It is used as a bench in chemistry, biology, pharmacy, radiology, physics, cosmetics, botanical laboratories, hospitals, operating theaters, food industry laboratories and industrial kitchens.
Disinfectants and cleaning agents that G-Lab® is resistant to:
Acetone, Toluene, Dimethyl Sulphoxide, Tetrahydrofuran, Turpentine, Ethyl alcohol, Ammonia, Caustic Soda, Potassium Hydroxide of 10%.
Chemicals not modified by G-Lab® in accordance with the EN 438-2 staining test:
Ethylene Glycol
Dichloromethane
Hydrogen Peroxide
Sodium Hydroxide
Ethyl Acetate
Trichloroethylene
Iodine
N-Hexane
Xylene
Boric Acid
Chromic Acid
Methylene
Acetic Acid
Copper sulfate 10%
Ether 20%
Ammonium Hydroxide 28%
Silver Nitrate 1%
Citric Acid 30%
Ferric (III) Chlorite 10%
Sodium Chlorite 10%
Sulphur Acid 33%
Nitric Acid 30%
Phosphoric Acid 4%
Hydrochloric Acid 37%
EN Classification: CGS, CGF
EN 438-4
Thickness: 0.80 mm - 22 mm
Dimensions:
1400x3660 mm - 1540x3050 mm
1540x3660 mm
G-Lab® is a bench panel with extra durability against chemicals thanks to the special surface produced using advanced technology.
Thanks to a G-Lab® feature, it is manufactured to last 24 hours with the most aggressive chemicals with its surface that is not affected by cleaning materials, strong organic solvents, acids, bases and salts. Thanks to all these features, it is easy-to-maintain and easy-to-clean.
It is used as a bench in chemistry, biology, pharmacy, radiology, physics, cosmetics, botanical laboratories, hospitals, operating theaters, food industry laboratories and industrial kitchens.
Disinfectants and cleaning agents that G-Lab® is resistant to:
Acetone, Toluene, Dimethyl Sulphoxide, Tetrahydrofuran, Turpentine, Ethyl alcohol, Ammonia, Caustic Soda, Potassium Hydroxide of 10%.
Chemicals not modified by G-Lab® in accordance with the EN 438-2 staining test:
Ethylene Glycol
Dichloromethane
Hydrogen Peroxide
Sodium Hydroxide
Ethyl Acetate
Trichloroethylene
Iodine
N-Hexane
Xylene
Boric Acid
Chromic Acid
Methylene
Acetic Acid
Copper sulfate 10%
Ether 20%
Ammonium Hydroxide 28%
Silver Nitrate 1%
Citric Acid 30%
Ferric (III) Chlorite 10%
Sodium Chlorite 10%
Sulphur Acid 33%
Nitric Acid 30%
Phosphoric Acid 4%
Hydrochloric Acid 37%
EN Classification: CGS, CGF
EN 438-4
Thickness: 0.80 mm - 22 mm
Dimensions:
1400x3660 mm - 1540x3050 mm
1540x3660 mm
bottom of page